1. Classified according to the power supply mode of the product: divided into AC electric hand sterilizer and DC electric hand sterilizer
In China, AC hand sterilizers usually use 220V/50hz power supply, the pressure generated by the electromagnetic pump is uniform, and the spray or atomization effect is stable, but the installation location needs to be equipped with a power supply. DC power supply usually uses power supply, and some transformers are used. , Due to insufficient power supply capacity, usually this type of sterilizer has a poor atomization effect, and the effect is similar to that of a soap dispenser
2. Classified according to the state of the sprayed liquid: divided into atomized hand sterilizers, spray hand sterilizers, atomized hand sterilizers usually use high-pressure electromagnetic pumps, and the sprayed disinfectant is uniform and can fully contact the skin or rubber gloves. , The disinfection effect can be achieved without rubbing with a small amount of disinfectant. This product is becoming the mainstream product in the market. The spray hand disinfector has insufficient pressure of the electromagnetic pump on the one hand, and on the other hand, the design of the nozzle is insufficient. Reasonable, the sprayed disinfectant has the phenomenon of flowing, which leads to its unsatisfactory effect, resulting in a waste of disinfectant, and now less and less are selected
3. According to the material classification of sterilizers, it is divided into ABS plastic hand sterilizers. Stainless steel hand sterilizer ABS has become an excellent material for hand sterilizer housing due to its stable chemical properties and easy forming characteristics, but the color is aging and easy It was scratched and affected his beautiful stainless steel hand sterilizer. It usually uses 304 stainless steel as the shell material, which is durable. It has become the best partner for high-end food and pharmaceutical manufacturers. The only drawback is that it is more expensive, but it is durable. The durability is still affirmed by users. If the customer has no special requirements for the material, a newly launched ABS industrial plastic hand sterilizer by Voith can also meet the GMP certification requirements.